Welbilt Convotherm OES mini easyTouch, Руководство по установке

Страница: 55 / 106

5.9 Setting up the appliance on the floor (6.10 mini 2in1)
Rules for setting up the appliance safely
Observe the following rules to ensure that the appliance is installed in a stable situation:
■
The stand for the appliance must be fixed so that it cannot tip over when subject to a one-sided
load - e.g. appliance door is open.
■
It must be possible to set up the stand in the installation position so that it cannot tip over or slide
about. The subfloor must satisfy relevant requirements.
The following rules must be observed to meet hygiene standards:
■
For stands that contain shelf levels for food containers, the top cover must be fitted on the stand to
prevent dirt getting onto any food held temporarily in the stand.
Installing appliance with wall bracket
When setting up the appliance on the floor, follow the steps below:
Step Action Illustration
1
Position the appliance on the floor.
2
1
2
Ensure the appliance is horizontal by adjusting the
height of the feet (1).
Use a spirit level to ensure the unit is horizontal in all di‐
rections.
3
Use the wall bracket (2) to fix the appliance so that it
cannot tip over.
Installing appliance with floor attachment
If it not possible to fix the appliance to the wall, the appliance can be ordered from the manufacturer
with a floor attachment instead.
Observe local regulations on the floor condition for this purpose.
The following diagram shows the floor attachment part:
5 Setting up the appliance
Installation manual 55