Welbilt Convotherm OES mini easyTouch, Руководство по установке

Страница: 51 / 106

5.6 Setting up the appliance on a worktable
Rules for setting up the appliance safely
Observe the following rules to ensure that the appliance is installed in a stable situation:
■
It must be possible to set up the worktable in the installation position so that it cannot tip over or
slide about. The subfloor must satisfy relevant requirements.
■
The appliance must be installed on the worktable worktop so that it cannot tip over or slide about.
Setting up the appliance on a worktable (6.06/6.10 mini)
When setting up an appliance on a work surface, follow the steps below:
Step Action Illustration
1
Position the appliance on the worktable.
1
2
Ensure the appliance is horizontal using the supplied
shims (1).
Use a spirit level to ensure the unit is horizontal in all
directions.
Setting up the appliance on a worktable (10.10 mini)
When setting up an appliance on a work surface, follow the steps below:
Step Action Illustration
1
Position the appliance on the worktable.
1
2
Ensure the appliance is horizontal by adjusting the
height of the appliance feet (1).
Use a spirit level to ensure the unit is horizontal in all
directions.
5 Setting up the appliance
Installation manual 51