Welbilt Convotherm mini black easyTouch 10.10, Руководство по установке

Страница: 135 / 148

6.3.3 Connecting the Fully Automatic Cleaning System
Rules for safely connecting the fully automatic oven cleaning system
Getting the ConvoClean and ConvoCare connections mixed up may pose a risk of injury or illness
when food cooked afterwards is eaten.
In order to prevent this risk, make sure to observe the following rules:
■
When connecting ConvoClean forte and ConvoCare, make absolutely sure that the hoses are con‐
nected to the right fitting and the right canister cap.
Prerequisites
Check whether the following prerequisites are met:
■
Cold water connection as specified in the Water Supply on page 54 section
■
Drain connection as specified in the Water Drain on page 56 section
■
Technical prerequisites as specified in the Technical Data on page 68 section
Connecting the Fully Automatic Cleaning System
Follow the steps below to connect the ConvoClean system:
Step Procedure
1
Slip the red suction tube (4) for the cleaning agent on‐
to the barbed nipple on the outer bulkhead fitting (G)
and secure the tube using the wire hose clamp (3)
(see 'Cleaning agent connection' label at the back of
the unit).
F
4
5
2
1
3
G
3
2
Slip the green suction tube (2) for the rinse aid onto
the barbed nipple on the inner bulkhead fitting (F) and
secure the tube using the wire hose clamp (3) (see
'Rinse aid connection' label at the back of the unit).
3
Insert the suction nozzle on the red suction tube into
the ConvoClean forte canister (5). The tube must be
routed without any kinks and the canister's vent open‐
ing must be open and clear.
4
Insert the suction nozzle on the green suction tube into
the ConvoCare canister (1). The tube must be routed
without any kinks and the canister's vent opening must
be open and clear.
5
Start a cleaning sequence with the 1st setting and
check to make sure that cleaning agent is sprayed in‐
side.
6 Installation
Installation Manual 60