9.
Refit the covers on the appliance feet and tighten the screws on the brackets
for the appliance feet.
10.
Stick the necessary warning labels in the specified positions. Make sure that
the surface is clean of oil and grease before sticking the warning label in place.
Additional information:
you can find the warning labels inside the cooking chamber.
Type and position of the warning sign stickers to be attached
The following warning signs must be attached to the combi oven in the specified positions:
Warning sign
Position on the combi oven
Somewhere on the left side of the appliance door in area 2 (see 'Warning signs on the combi oven' on page 15)
depending on the installation situation
Directly above the door handle if
■
the top of the appliance lies above 1.20 m or
■
personnel are mainly semi-skilled staff (recommended)
Right at the top of the appliance door if
■
the top of the appliance does not lie above 1.20 m
1.60 m above the kitchen floor.
5.8 Setting up appliances in the stacking kit
Rules for installing the appliances safely in the stacking kit
Observe the following rules to ensure that the stacking kit fitted with appliances is stable:
■
It is only permitted to fit appliances of similar weight in the top and bottom of the stacking kit.
■
The stacking kit must never contain an appliance only in the top half.
■
It must be possible to set up the stacking kit in the installation position so that it cannot tip over or slide about. The subfloor
must satisfy relevant requirements.
5 Setting up the appliance
Installation manual
40
