manualshive.com logo in svg

Welbilt Convotherm maxx 10.10, Руководство по установке

Поделиться
Скачать
Welbilt Convotherm maxx 10.10 Скачать руководство пользователя страница 48

6.4.2  Connecting the fully automatic oven cleaning system

Connecting the fully automatic oven cleaning system to canisters

1.

Mix the supplied ConvoCare Kconcentrate with soft water

in the empty ConvoCare rinse aid canister.

Follow the instructions in the user manual on mixing the

ConvoCare rinse aid in the canister, and also the guid‐

ance on the canister label.

2.

Plug the green extractor tube (2) for the ConvoCare rinse

aid onto the connector nipple of the rear tube fitting (F)

and secure the tube in place with the wire clip (3) (see la‐

bel for rinse-aid connection on the left-hand side of the

appliance).

3.

Insert the suction nozzle on the green extractor tube (2)

into the rinse aid canister (1). There must be no kinks in

the tube and the vent hole in the canister must be open

and unblocked.

6 Installation

Installation manual

48

Содержание Convotherm maxx 10.10































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды