
Cleaning Methods
Description
When to use
Oven cleaning using only
rinse aid from a connected
canister or single-measure
dispensing
■
With easyTouch only: Cleaning profile
ConvoCare
■
Is a fully automatic process in which the
temperature, duration, use of rinse aid,
and rinsing are controlled by the software
■
Rinse aid will either be automatically add-
ed to the oven cavity from connected can-
isters in the right proportion or the soft-
ware will prompt the operator to apply
rinse aid from single-measure dispensing
bottles into the oven cavity
■
For further cleaning after fully automatic or
semi-automatic oven cleaning if the latter
did not get rid of all soiling and impurities
■
If there is a white film or dark discolora-
tions inside the oven cavity
Manual oven cleaning
■
Is an exclusively manual process without
any software assistance
■
The oven cavity remains unheated
■
The operator monitors the time during
which the cleaning agents are allowed
to work.
■
The cleaning agents are manually sprayed
into the oven cavity
■
The oven cavity is rinsed out manually us-
ing the recoil hand shower or, alternative-
ly, is wiped thoroughly with plenty of clean
water and a soft cloth
■
For cleaning soiling or eliminating odors
between individual cooking sequences af-
ter the oven cavity has been cooled down
■
For further cleaning after fully automatic or
semi-automatic oven cleaning if the latter
did not get rid of all soiling and impurities
■
For cleaning specific spots or areas inside
the oven cavity, such as the oven drain
■
If there is a white film or dark discolora-
tions inside the oven cavity
Visual inspection to ensure that there are no residues left after cleaning
Every time after cleaning with one of the aforementioned cleaning methods, carry out a visual inspection to make sure that
there are no residues left.
5.1.2 Cleaning Agent Delivery for Fully Automatic Cleaning Processes
Cleaning agent delivery versions
The type of cleaning agent delivery for the combi oven’s fully automatic cleaning processes is defined with a setting in the
software settings. This software setting defines whether it is possible or NOT possible to deliver cleaning agents from single-
dose dispensing bottles. A qualified service technician from an authorized service company can change this setting at any
time.
The following applies to cleaning agent delivery for fully automatic cleaning processes depending on the setting:
Single-dose dispensing bottle software
setting ON
Single-dose dispensing bottle software
setting OFF
Fully automatic cleaning
processes in general
■
Cleaning agent will be delivered exclusive-
ly with single-dose dispensing bottles.
■
Even if there are connected canisters, NO
cleaning agent or rinse aid will be drawn
from the canisters.
■
Canisters with cleaning agent and rinse
aid must be connected to the combi oven.
With easyDial only:
■
Delivering cleaning agent or rinse aid from
single-dose dispensing bottles instead will
NOT be possible.
Fully automatic oven
cleaning
(ConvoClean for easyDial
or
Con for easyTouch)
At specific times in the cleaning process, the
operator will be prompted by the software to
bring one or more single-dose dispensing
bottles with cleaning agent or rinse aid into
the oven cavity.
■
Cleaning agent and rinse aid will be dosed
by the software and conveyed from the
connected canisters into the oven cavity
fully automatically.
With easyTouch only:
■
Delivering cleaning agent or rinse aid from
single-dose dispensing bottles instead will
NOT be possible.
5 How to Clean the Combi Oven
Operating Manual
61