Welbilt C4 12.20 GB, Руководство пользователя

Страница: 70 / 116

5.2.2 How to perform fully automatic oven cleaning using single-measure dispensing
bottles
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings specified in the chapter
'For your safety on page 18' and in this instruction manual, and follow the instructions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely 42
■
Emptying the condensate collecting tray in the loading trolley 91
■
Adding cleaning agent from single-measure dispensing bottles to the cooking chamber 100
Handling single-measuring dispensing bottles
■
Take care not to get cleaning agent or rinse aid on the work surface
■
Do not place empty single-measure dispensing bottles on the work surface, because the cleaning agent or rinse aid
could drip down the outside
■
Wear personal protective equipment
Requirements
■
You are sufficiently familiar with using the software to be able to select and run different cleaning profiles; please refer to
the Operating instructions for the combi oven.
■
The appliance and fittings or accessories being used show no signs of damage.
■
The installed electrical power cables, water supply pipes and pipes for wastewater show no signs of damage, are fixed
securely, are not leaking from any point and appear safe and in working order on visual inspection.
■
No food has been left in the cooking chamber. There are no foreign objects in the cooking chamber.
■
All containers, baking trays, shelf grills and any other accessories have been removed from the cooking chamber.
■
The oven drain is not blocked or clogged with any residues. The filter is fitted in place on the oven drain.
■
The condensate collecting tray in the loading trolley is empty.
■
The empty loading trolley has been wheeled into the cooking chamber.
■
The interior glass door of the appliance door is secured properly in place.
■
The suction panel is properly locked in place.
■
The appliance door is closed.
■
You have provided the necessary cleaning resources for your cleaning program; see 'Preparing the cleaning agents' on
page 67.
How to perform fully automatic cooking chamber cleaning using single-measure dispensing bottles (easyTouch)
1.
Select the cleaning profile and start the cleaning process.
2.
Follow the prompts displayed by the software.
■
If the oven is being preheated, wait for the process to finish and
then proceed with step 4.
■
If the oven is being cooled, proceed with step 3.
3.
Risk of scalding from hot steam and vapour
■
Expect to face a larger blast of steam than normal.
■
Make sure that any bystanders step back from the appliance.
■
Open the appliance door slowly and carefully.
Open the appliance door and wait for the process to finish.
5 Cleaning procedures
User manual 70