Page of 7
2
Thank you very much for choosing a WEL-BILT product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This helmet is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
The Solar-Powered Auto-Darkening Welding Helmet is ideal for most welding applications and
designed to meet the most demanding requirements. This helmet’s 1/10,000-second switch time
automatically darkens the lens the instant you start welding.
TECHNICAL SPECIFICATIONS
Viewing Area:
98 x 44mm (3.86" x 1.73")
Cartridge Size:
110 x 90 x 9mm (4.33" x 3.54" x 0.35")
Arc Sensor:
2
Light State:
DIN 3.5
Dark State:
DIN 9 ~ 13
Shade Control:
External, Variable Shade
Power On/Off:
Fully Automatic
UV/IR Protection:
Up to Shade DIN16 at all times
Power Supply:
Solar cell. No battery change required
Switching Time:
1/10,000 s. from Light to Dark
Low Amperage TIG Rated:
≥
10 amps
Operating Temp.:
-10°C ~ +55°C (14°F ~ 131°F)
Storing Temp.:
-20°C ~ +70°C (- 4°F ~ 158°F)
Helmet Material:
High Impact Resistance Nylon
Total Weight:
435g (15.3oz.)
Application range:
MIG; MAG/CO2; SMAW; Air carbon cutting;
TIG ; PLASMA arc welding/cutting
Approved:
ANSI Z87.1, CSA Z94.3
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.