background image

Page    of 11 

 

 

Thank you very much for choosing a Wel-

Bilt™ product. For future reference, please complete 

the owner’s record below: 
            Model: _______________          Purchase Date: _______________ 

Save the receipt, warranty and these instructions. It is important that you read the entire manual 

to become familiar with this product before you begin using it.   

 
This machine is designed for certain applications only. The distributor cannot be responsible for 
issues arising from modification. We strongly recommend this machine  not be modified and/or 
used  for  any  application  other  than  that  for  which  it  was  designed.  If  you  have  any  questions 
relative to a particular application, DO NOT use the machine until you have first contacted  the 
distributor to determine if it can or should be performed on the product. 
 
For technical questions please call 

1-800-222-5381

 

INTENDED USE 

This hydraulic, foot-operated log splitter is designed to split logs quickly and efficiently. Adjustable 

splitting wedge handles different-sized logs up to 24in.L max. 

TECHNICAL SPECIFICATIONS   

8-ton capacity   
Splits logs up to 23in. long and 14in. diameter 
Splitting wedge is adjustable to 5 different heights.   
Rolls on solid polypropylene wheels for easy portability. 

 

GENERAL SAFETY RULES 

WARNING:

 Read and understand all instructions.

 Failure to follow all instructions listed 

below. The log splitter is only intended to be used to split logs; using the log splitter for any other 

applications may result in serious injury.   

 

CAUTION:

 Do not allow persons to operate or assemble this splitter

 

until they have 

read this manual and have developed a thorough understanding of how the splitter works.

 

 

WARNING:

  The  warnings,  cautions,  and  instructions  discussed  in  this  instruction 

manual  cannot  cover  all  possible  conditions  or  situations  that  could  occur. 

It  must  be 

understood by the operator that common sense and caution are factors which cannot be built into 

this product, but must be supplied by the operator. 

 

 

SAVE THESE INSTRUCTIONS 

 

Содержание 365398












Отзывы: