Pick-O-Mat • PM1100 / PM1500 • R02-2014
18/44
Transport
4.1 Appliances and auxiliary equipment approved for transportation
4
4
Transport
•
Transport work may only be conducted by specialised personnel and the safety
instructions must be observed.
•
Note that projecting sharp edges can cause injuries.
•
The transport path must be cordoned off and safeguarded in such a manner that
unauthorised personnel cannot enter the danger zone.
•
The parts must be safeguarded against tipping or falling.
4.1
Appliances and auxiliary equipment approved for transportation
4.1.1
Transporting of the packed machine
Falling packaging unit.
The hoisting cables can slip if they are not fitted correctly. The package unit can tilt, slip
out of the slings and fall.
Only lifting equipment with crossbeam trusses should be used. The lifting slings should
be fitted outside the supporting timbers. A falling package unit can cause severe to fatal
injuries.
Fig. 9:
Transporting the packed machine
WARNING
Falling or sagging loads can lead to grievous injuries. Inadequately dimensioned
load bearing equipment can break. Transport vehicles not designed to support the
weight of the machine may fail or topple over.
Lifting devices, conveyor vehicles (pallet trucks) and load carrying equipment should
conform to regulations and be designed to support the weight of the machine including
packaging. It is forbidden to stand or be present under suspended or lifted loads. A falling
or toppling machine can cause grievous or fatal injuries.
