45-
10
Maintenance and cleaning
Maintenance interval: every 2 million cycles
Maintenance scope: Cleaning of the movement apparatus and inspection of the gripping module.
Clean the gripping module at regular intervals with a damp cloth to remove all dirt.
The gripping module is adjusted at the factory. Do not disassemble base jaws and belts!
The maintenance intervals must be adapted to the ambient and operating conditions. The following factors
must be taken into account:
•
Increased operating temperatures
•
Condensation and condensation water effects
•
High vibration stress
•
Use in vacuum
•
Highly dynamic operation
•
Influence of foreign substances (e.g. vapours, acids, etc.)
The guideways are lubricated for life. In individual cases, relubrication may be necessary. Contact
our support for assistance.