WEISS ROBOTICS 5120012 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 69

background image

- 5 -

Please find additional information about the warranty in our general terms and conditions, available online
at

https://www.weiss-robotics.com/en/general-terms-and-conditions

1.3

Target Audience

These instructions are targeted at plant manufacturers and operators, who should make this and other doc-
uments permanently available for the personnel and should also ask the personnel to read and observe par-
ticularly the safety instructions and warnings.
In addition, this manual is targeted at professionals and technicians, who should read this manual and should
particularly observe the safety and warning notes at all times.

1.4

Notation and Symbols

For better clarity, the following symbols are used in this manual:

Functional or safety-related information. Failure to comply may jeopardize the safety of per-
sonnel and equipment, damage the device, or impair the functionality of the device.

Additional information for a better understanding of the facts described.

Reference to further information.

2

Basic Safety Notes

2.1

Intended Use

The module was designed to grip and temporarily and securely hold work pieces and objects. The module is
intended for installation in a machine/system. The requirements of the applicable guidelines as well as the
mounting and operating notes in this manual must be observed and complied with. The gripping module may
only be used in the context of its defined application parameters and only in industrial applications.
Any other use or use exceeding the intended use is deemed improper, e.g. when the gripping module is used
as a pressing, cutting, lifting, or punching tool, or when it is used as a clamping device or guide for other tools.
The manufacturer is not liable for any damage resulting from such use.

«
...
4
5
6
7
8
...
»

Содержание 5120012






































































Отзывы:

Нет отзывов

Похожие инструкции для 5120012

Nationlal league 25 Green

Бренд: Butterfly Страницы: 4

Бренд: EFORT Страницы: 55

Бренд: EFORT Страницы: 305

Бренд: Tibhar Страницы: 14

Бренд: Table-Tennis-Tables Страницы: 9

HEXBUG VEX ROBOTICS SWITCHGRIP 406-5517

Бренд: Innovation First Страницы: 23

Бренд: Waveshare Страницы: 6

Бренд: Steren Страницы: 42

CODINGS & ROBOTICS KIT Quirkbot

Бренд: Strawbees Страницы: 12

Бренд: Niryo Страницы: 38

Бренд: kowatec Страницы: 26

Бренд: COVVI Страницы: 60

Бренд: Universal Robots Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды