Weishaupt WWP LS 10-B R HE Скачать руководство пользователя страница 41

Страница: 41 / 88

Installation and operating instruction
Hydraulic unit WWP LS 8 ... 16-B

6 Operation

83306902 2/2017-05 La

41-88

6.7 Menu structure

In the user level, access to the menu structure is limited [ch. 6.5].
All information and parameters can be accessed via the expert level [ch. 6.6].

Depending on the hydraulics and control variations, certain information and para-
meters are hidden.

6.7.1 Info

In menu Info, the information is read only.

6.7.1.1 Heating circuit

Info

Heating circuit

Information

Description

External temperat-
ure

Current temperature at the external sensor (B1).

DHW
temperature

Current temperature at the DHW sensor (B3).

Load demand

Current load demand to external unit.

Flow setpoint tem-
perature

Flow setpoint temperature required by the heating circuit.

Flow temperature

Current flow temperature of heating circuit, measured at the flow sensor down-
stream of electric heating (B7).

Dynamic switch
differential

Switch-on criteria for the heat pump.
If the current flow temperature drops below the flow setpoint temperature by the
value displayed, the heat pump starts.
Only activated if

Dynamic switch differential

is set to

, see

[ch. 6.7.5.2].

Return temperature

Current return temperature of heating circuit, measured at return sensor (B9).

De-couple temper-
ature

Current temperature at de-couple sensor (B2).

Speed pump

Current speed of pump in heating mode.

Volumetric flow

Current volumetric flow at flow sensor (B10) of the hydraulic unit.

Setting of change-
over valve

Current setting of three way valve of hydraulic unit.

Version WWP-SG

Current software version of system device.

Version WWP-CPU

Current software version of device circuit board.

Only appears in Expert level.

Содержание WWP LS 10-B R HE

























































































Результаты поиска

Содержание WWP LS 10-B R HE

Отзывы:

Бренды по названию

Популярные бренды

Weishaupt WWP LS 10-B R HE, Инструкция по установке и эксплуатации

Результаты поиска

Содержание WWP LS 10-B R HE

Отзывы:

Бренды по названию

Популярные бренды