manualshive.com logo in svg

Weishaupt WL40Z-A 1LN, Руководство пользователя, Страница: 10 / 112

Поделиться
Скачать
Weishaupt WL40Z-A 1LN Скачать руководство пользователя страница 10

Installation and operating instruction
Oil burner WL40Z-A 1LN

3 Product description

83298902 2/2019-05 La

10-112

3.3 Function

3.3.1 Air supply

Air damper

The air damper regulates the air quantity required for combustion. The combustion
manager drives the air damper via actuator. At burner shutdown the air damper
closes automatically. At burner shutdown the air dampers close automatically.

Fan wheel

The fan wheel supplies the air from the air intake housing to the combustion head.

Diffuser

The air gap between flame tube and diffuser is adjusted by positioning the diffuser.
This adjusts the mixing pressure and the air quantity required for combustion.

Air pressure switch (optional)

Depending on the burner application, optional equipment may be required for op-
timum operation [ch. 12.2].

The air pressure switch monitors the fan pressure. If the fan pressure is insufficient,
the combustion manager initiates a lockout.

Содержание WL40Z-A 1LN

















































































































Отзывы:

Нет отзывов