Weishaupt WCM-EM 2.1, Инструкция по установке и эксплуатации

Страница: 61 / 108

6.5.21 Set speed variables
Parameter is only displayed if a PWM pump is connected
Setting range
Level Setting for condensing boilers.
The pump runs with maximum speed in normal operation
and with minimum speed in setback operation.
Reference line
Setting for low temperature boilers.
The heating circuit pump is operated at min. speed. If the
maximum supply temperature set is reached, the pump
speed increases linear.
▶
Activate heating engineer level (see Ch. 6.5).
▶
Press function key
Heating circuit
.
▶
Press function key
Setting #2
.
✓
Menu
Setting #2
is displayed.
▶
Press function key
VSD variable
.
✓
Parameter
VSD variable
is displayed.
▶
Make selection using the dial knob and save with function key
OK
.
03
Setting #2
max pump speed 100%
VSD variable Level
Delay WTC 30s
End
-
+
VSD variable 429
End
Standard
OK
Level
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
61-106