Weinmann MEDUCORE Standard2, Инструкция по эксплуатации

Страница: 204 / 396

204 EN MEDUCORE Standard
2
WM
6840
1
0
4
/2
021
6 Operation
2. Select the Print menu item.
The printer prints the replay view of the event on printer paper
(10 s from the time of the event, shown in abstract form here):
3. To stop printing manually: Select the Stop print xx s menu
item.
Result Replay view of an event (replay printout) has been printed.
6.16.7 Print a session report (only with Printing
option)
Requirement • A printer has been connected to the device (see “6.16.1
Connecting the printer to the device”, page 196) .
• The Print option is enabled and activated (see “13.12 System
settings”, page 342) .
• The details included in the session report have been specified
in the operator menu
(see “13.9 Printer settings (only with
Printing option)”, page 332) .
• A session has been selected in the session archive (see “6.17.1
Selecting a session in the session archive”, page 205) .
If you are the operator of the device and have access to the
operator menu, you can adapt automatic stopping of printing to
suit your requirements:
Operator menu | Printer settings | Automatic stop print (see
“13.9 Printer settings (only with Printing option)”, page 332)