Weinmann ACCUVAC Rescue WM 10600, Инструкции по обслуживанию и ремонту

Страница: 25 / 36

Repairs: Information and Instructions 25
9.12 Changing fuse in vehicle plug
Tools and equipment required:
• Phillips screwdriver size 2.
1. Use a screwdriver to open the vehicle plug.
Note
: The central contact of the plug is the plus
pole. The plus lead of the cable has either a
square cross-section or colored markings.
The outer contact of the plug is the minus pole.
The minus lead of the cable is round and
black.
2. Change the faulty fuse
58
. Use only approved
fuses (see ”13. Technical Data“ on page 30).
3. Screw the vehicle plug together again.
4. Perform a function check (see ”7.2 Performing
the function check“ on page 10).
9.13 Changing the muffler
Tools and equipment required:
• Phillips screwdriver size 2.
1. Use a screwdriver to unscrew the cover plate
(2 cross-head screws
41
).
2. Remove the old muffler
12
.
3. Insert a new muffler
12
.
58
41
12