上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 70 - Specialized, Concentrated, Focused
Fig. 3-45 Local program screen
Users can find the processing files under the default path of hard disk and execute such operations
as loading, editing, deleting and renaming them. In addition, users can create a new processing file
under the default path D:\NCFILES and edit it.
Load
After the processing file is selected (press ―↑― or ―↓‖ key to move cursor to the target file), pressing
shortcut key F1 will make the system load the file automatically, progress bar on the lower right part
displaying the schedule. After loading finishes, other operations are available.
Delete
After selecting a file, press F3 to eject a prompt box asking users whether to delete the file.
Note:
If the selected file is under the state of being loaded or edited, deleting it is prohibited.
Edit
After the processing file is selected, pressing shortcut key F4 will make the system eject its
embedded program editor automatically, in which users can edit the contents in the file. After editing,
press F1 to save and confirm the modification and return to [Local Program] interface automatically.
Note: The file being loaded cannot be edited. Unload it before editing it if necessary.
Rename
After selecting a processing file, press shortcut key F5 to eject a file name input box asking users to
input the new name, and then pressing F1 will complete the operation.
New
After shortcut key F7 is pressed, the system will switch to edit page. You can enter the program here.
