Information
12
00/07.12
2.
Information
The mounting-rail cutting and punching device has
been specially designed for processing DIN mount-
ing rails.
2.1 TSDL
t = thickness of material
TS 35/7.5 mm to EN 50022; t = 1.0 mm
TS 35/15 mm to EN 50022; t = 1.5 mm
TS 32 mm to EN 50035; t = 1.5 mm
TS 15/5.5 mm to EN 50045; t = 1.0 mm
Copper earth bars 10 mm x 3 mm
The mounting-rail cutting and punching device can
process only those types of mounting rails, which
are made of steel, described above.
The mounting-rail cutting and punching device can
punch diagonal and longitudinal holes in mounting
rails, which it can also cut to length (12x 6.4 mm di-
agonal and longitudinal holes).
2.2 TSD 35
t = thickness of material
TS 35/7.5 mm to EN 50022; t = 1.0 mm
TS 35/15 mm to EN 50022; t = 1.5 mm
The mounting rail cutters can only be used on the
steel rail types described above.
3.
Technical data
3.1 TSDL
Technical data
Length:
270 mm
Width:
205 mm
Height:
(without longitudinal
stop, without lever)
200 mm
Longitudinal stop:
1000 mm
Lever:
1000 mm
Total weight:
19 kg
3.2 TSD 35
Technical data
Length:
142 mm
Width:
110 mm
Height:
(without longitudinal
stop, without lever)
200 mm
Longitudinal stop:
1000 mm
Lever:
1000 mm
Total weight:
11,4 kg
Содержание TSD 35
Страница 67: ...00 07 12 67 1 1 1 1 2 1 3 1 4 CE 1 5 Weidm ller Weidm ller WEEE 2002 96 EG B2B Business to Business 13 08 2005...
Страница 70: ...TSD 35 70 00 07 12 4 3 Y 3 LOCHEN 7 6 z 6 8 75 5 TSD 35 5 1 1 2 1 DIN 3 4 3 5 2 5 SCHNEIDEN 3...
Страница 71: ...00 07 12 71 6 7 6...
Страница 80: ...80 00 07 12 8 2 TSD 35 3 4 5 1 2...
