User Manual Managed Switches
19
Cfg Cmd
Setting
Description
Factory
Default
Check / Uncheck
Also authorize configuration commands.
Unchecked
Accounting Method Configuration
The accounting section allows the administrator to configure command and exec (login) accounting.
For each client type (console, telnet and ssh) the following parameters can be programmed:
Method
Setting
Description
Factory
Default
no
Accounting is disabled.
no
tacacs
Use remote server(s) for accounting.
Cmd Lvl
Setting
Description
Factory
Default
0 to 15
Enable accounting for all commands with a privilege
level higher than or equal to this level.
0
Exec
Setting
Description
Factory
Default
Check / Uncheck
Enable exec (login) accounting.
Unchecked
3.3.4.3 Access Security
In this option the user can program the allowed IP addresses that can access to the management of
the switch (Access Management). A table of up to 16 different entries can be created using the
Add
New Entry
button.
