Disconnecting the plug
15
WM4 C
2454640000/02/07.2017
Step 5: Connecting the plug
▶
Plug the male pin housing into the female socket housing
until the latching hooks snap into place.
▶
Check that the fastening is correct by gently pulling.
Disconnecting the plug
WARNING
Hazardous voltage!
The electrical connections must not be discon-
nected and plugged under load. Depending on the
light intensity, voltage, generated by the module,
may be present!
The housings of the plug can be separated without any tool.
▶
To disconnect the connector press the latching hooks
together and pull the housing components apart.
