Cleaning
Use the usual commercial means of care for polyester tents for the cleaning of the tent.
•
Do not wash the tent in the washing machine.
•
Do not have the tent cleaned by the dry-cleaner.
•
Packing and storing
Pack the components of the tent in a dry and clean condition to avoid the creation of
•
mould. Allow the parts to dry thoroughly if they have become wet during use.
Store the parts of the tent at a dry place. The fabric, the rods and zipper may be
•
attacked
by mould or corrosion if stored in a wet condition.
The site
Select a site that is as level as possible and free from depressions in the ground.
•
Remove stones, rocks, branches of trees and other objects before you begin with the erec-
•
tion of the tent. Sharp edges may not only damage the tent but they can also be very an-
noying.
Erect the tent in such a way that the entrance is out of the direction of the wind. Also make,
•
if possible, use of natural wind breaking effects.
General instructions
Make the transport bag completely empty.
•
Separate, if required, the outside tent and the inside tent.
•
Connect all rods in the required way.
•
Place the accessories, such as earth nails, tent pegs, tensioning cables, etc. in the proper
•
way around you.
Erecting
1. Spread the outer tent on the ground with the channels facing upward.
2. Push the 3 fibreglass poles through the channels.
3. To erect the tent, the poles are to be bent one after another and tensioned with the tent.
To do so, insert a spike in the end of a rod (Ring-Pin-System, ill.1). On the other side, pull the
material over the rod as it bends and insert the spike in the free end of the rod.
ill. 1
ill. 2
Gebrauchsanweisung_15838.indd 7
01.10.2009 8:59:00 Uhr
