Operation and Service Instructions
4
Version: 10.02.2020
The following tables are only valid for a slab height h of up to 2m.
Option trapezoidal support: (valid for
h
= 1.8 m)
(Load this support from both sides)
4 Safety regulations
•
Before using this slab stand, read the operation manual thoroughly.
•
Keep this manual in close proximity of the stone slab.
•
The dealer or manufacturer will not be liable for any damage caused by unauthorized modifications or the installation of
additional equipment.
•
Remove all objects from the working area that could be a potential source of danger.
•
Make sure that the surface on which you set up the slab stand is horizontal or level, has the necessary stability and has
a load-bearing capacity corresponding to the weight to be lifted.
•
Keep the storage area clean and provide adequate lighting.
•
The slab stand may only be operated by authorized persons. Every operator must have read and understood this
documentation.
•
Check the load-bearing parts and welds for damage before each use. If defects are found, stop the operation of the
plate stand and take appropriate measures to prevent its use by third parties.
•
Ensure a non-slippery surface in the working area
•
Do not stand under suspended loads.
•
Always wear appropriate protective clothing when handling the slab stand. This includes suitable work gloves and
footwear in accordance with accident prevention regulations.
•
Only use workpiece materials suitable for the properties of the unit, such as stone slabs without cracks ("healthy" stone
slabs).
•
Ensure that no one is near the unit during operation to avoid endangering third parties.
•
Check if all parts are correctly assembled.
•
If any damage or malfunction occurs to the unit, contact the dealer or manufacturer immediately.
•
Protect the device or machine from weather conditions such as rainwater, sunlight, moisture, etc.
RR
r = 1 m
r = 1.5 m
d[cm] a[cm] d[cm] a[cm]
9
17.6
4.5
54.6
17
8.8
6
40.2
29
5.2
8.9
26.5
17.7
13.1
29.4
7.9
Bison
r = 1.5 m
d[cm]
a[cm]
18
14
22
12
26
10
32
8
42
6
MAGNUM
r = 1.2 m
r = 1.5 m
d[cm] a[cm] d[cm] a[cm]
13
20
9
25
16
16
11
20
22
12
15
15
26
10
18
10
33
8
22
8
IRAXX
r = 1.5 m
d[cm]
a[cm]
22
16
24
14
27
12
31
10
36
8
44
6
Trapezoidal support
d[cm]
a[cm]
30
50.9
58
24.6
190
7.3
