Operation and Service Instructions RR/QR/Magnum
File: N:\Bedienungsanleitungen aktuell\Bedienungsanleitungen_Fremdsprachlich\Englisch\Plattenständer
Erstellt 12.09.2013
Page 4 of 11
•
Safety shoes in accordance with the valid regulations!
13. Use only suitable work pieces. Do not lift slabs liable to crack or break during the work process.
14. Make sure that during use nobody is in the proximity of the equipment, in order to avoid danger to other personnel!
15. Check to see whether all the parts are correctly installed!
16. In case of damage or malfunction of the machine, please contact the dealer or the manufacturer immediately!
17. Protect the machine against the weather, e.g. rain, sun, humidity and etc.!
18. In case of irreparable damage or other reasons, which prevent the use of the machine in the long -term, cease its
operation, by making the machine unusable thus making sure that there
’s no danger to other people!
19. If disposing of the machine or parts thereof, dismantle and separate the different materials, which can then be
disposed of to be recycled!
4.4 Machine Identification Plate
The identification plate informs about the origin, identity as well as year of
construction and, if necessary, about the maximum carrying capacity.
By the supply please compare the identification plate with the data on the
first side of the operating instructions. If the data differ from each other,
please contact immediately the dealer or the manufacturer.
4.5 Technical and Structural Data
4.5.1 Slab Stand RR with Supporting Tubes 1 Meter
Total height [cm]
110 cm
Max. Bearing Capacity [kg]
See Chapter 5.1 Bearing Cap.
Total width [cm]
300 cm
Net weight
250 kg
Total depth [cm]
adjustable
Height of Iron Tube
100 cm
4.5.2 Slab Stand RR with Supporting Tubes 1,5 Meter
Total height [cm]
160 cm
Max. Bearing Capacity [kg]
See Chapter 5.1 Bearing Cap.
Total width cm]
300 cm
Net weight
280 kg
Total depth [cm]
adjustable
Height of Iron Tube
150 cm
4.5.3 Slab Stand Bison with Supporting Tubes 1,5 Meter
Total height [cm]
160 cm
Max. Bearing Capacity [kg]
See Chapter 5.1 Bearing Cap.
Total width [cm]
300 cm
Net weight
250 kg
Total depth [cm]
adjustable
Height of Iron Tube
150 cm
4.5.4 Slab Stand IRAXX with Supporting Tubes 1,5 Meter
Total height [cm]
160 cmm
Max. Bearing Capacity [kg]
See Chapter 5.1 Bearing Cap.
Total width [cm]
300 cm
Net weight
250 kg
Total depth [cm]
adjustable
Height of Iron Tube
150 cm
5 Assembly
Please rea
d carefully the information in the chapter “Assembly” and follow it precisely. The manufacturer or the company WEHA-Ludwig
Werwein GmbH will not be liable for any damage due to incorrect assembly.
Before beginning the assembly, please check precisely to see whether all necessary parts are available. If the extent of the supply is not
complete contact the dealer or the manufacturer immediately.
5.1 Scope of Delivery
Before beginning the assembly, please check precisely to see whether all necessary parts are available. If the extent of the supply is not
complete contact the Transport Company, the dealer or the manufacturer immediately
The scope of supply consists of:
1 x Slab Stand consisting of:
•
2 x perforated rails
•
20 x Iron Tubes with Type RR or 16 x Iron Tubes with Type Magnum / Type Bison
