WEG CFW501 V1.8X, Руководство по программированию, Страница: 49 / 192

Basic Instructions for Programming and Settings
CFW501 | 5-7
5
38 = gal/h
39 = l/s
40 = l/min
41 = l/h
42 = m/s
43 = m/min
44 = m/h
45 = ft/s
46 = ft/min
47 = ft/h
48 = m³/s
49 = m³/min
50 = m³/h
51 = ft³/s
52 = ft³/min
53 = ft³/h
Properties:
Access groups
via HMI:
HMI
Description:
This parameter selects the engineering unit that will be viewed in the user’s parameter of the SoftPLC which is
associated to it, that is, any user’s parameter of the SoftPLC that is associated to the indirect engineering unit
1 will be viewed in this format on the CFW501 HMI.
NOTE!
Parameters P1011, P1015, P1027, P1028, P1031 and P1033 of the main PID controller (HVAC functions)
are associated to the indirect engineering unit 1.
P0511– Indirect Indication Form 1
Adjustable
Range:
0 = wxyz
1 = wxy.z
2 = wx.yz
3 = w.xyz Factory
Setting:
1
Properties:
Access groups
via HMI:
HMI
Description:
This parameter selects the decimal point that will be viewed in the user’s parameter of the SoftPLC which is
associated to it, that is, any user’s parameter of the SoftPLC that is associated to the indirect indication form 1
will be viewed in this format on the CFW501 HMI.
NOTE!
Parameters P1011, P1015, P1027, P1028, P1031 and P1033 of the main PID controller (HVAC functions)
are associated to the indirect indication form 1.
P0512 – Indirect Engineering Unit 2
Adjustable
Range:
0 = none
1 = V
2 = A
3 = rpm
4 = s
Factory
Setting:
11