WEG CFW320, Руководство пользователя

Страница: 39 / 62

TECHNICAL SPECIFICATIONS
7.2.1 Considered Standards
Table 7.2: Considered standards
Safety standards UL 61800-5-1 - adjustable speed electrical power drive systems - Part 5-1: Safety requirements - electrical,
thermal and energy
EN 61800-5-1 - safety requirements electrical, thermal and energy
EN 50178 - electronic equipment for use in power installations
EN 60204-1 - safety of machinery. Electrical equipment of machines. Part 1: general requirements
Note : the final assembler of the machine is responsible for installing a safety stop device and a supply disconnecting
device
EN 60146 (IEC 146) - semiconductor converters
EN 61800-2 - adjustable speed electrical power drive systems - part 2: general requirements - rating
specifications for low voltage adjustable frequency AC power drive systems
Electromagnetic
compatibility (EMC)
standards
(*)
EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC product standard including specific
test methods
CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment - electromagnetic disturbance
characteristics - limits and methods of measurement
EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section 2:
electrostatic discharge immunity test
EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section 3:
radiated, radio-frequency, electromagnetic field immunity test.
EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section 4:
electrical fast transient/burst immunity test
EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section 5:
surge immunity test
EN 61000-4-6 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section 6:
immunity to conducted disturbances, induced by radio-frequency fields
Mechanical
standards
EN 60529 - degrees of protection provided by enclosures (IP code)
UL 50 - enclosures for electrical equipment
IEC 60721-3-3 - classification of environmental conditions - part 3: classification of groups of environmental
parameters and their severities - section 3: stationary use at weather protected locations level
(*) Compliance with standards upon installation of external RFI filter. See Chapter 3 INSTALLATION AND CONNECTION on page 12 .
CFW320 | 33