weedingtech FoamStream M1200, Руководство пользователя, Страница: 4 / 36

M1200 – User manual – English (EU) – 01/03/2018 - ISSUE 2
4
1. Introduction
Thank you for purchasing the Weedingtech M1200!
IT IS IMPORTANT THAT ALL OPERATORS READ AND
UNDERSTAND THESE INSTRUCTIONS BEFORE USING
THE MACHINE
Having read these instructions, the operator will:
• Understand how the M1200 works
• Identify key components in the M1200
• Know how to carry out pre-start and start-up
procedures
• Observe safe operating practices
• Be able to effectively operate the M1200
• Be able to shut down and clean the M1200
• Be able to perform basic maintenance and
troubleshooting tasks
PLEASE KEEP THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE
2. Important information
The following PPE (Personal Protective Equipment) are
recommended when operating the M1200:
• Eye protection is required when handling
Foamstream® concentrate
• Gloves are required as the lance assembly will get hot
• Safety Footwear suitable for working in the areas
concerned is recommended
• No specific protective clothing is required, although
use of overalls and a HI-Viz vest is suggested as best
practice.
IT IS THE RESPONSIBILITY OF THE OPERATOR TO WEAR
APPROPRIATE PPE
Never operate the machine without checking that there are
adequate supplies of clean diesel, clean water and clean
Foamstream® concentrate in the appropriate tanks.
The M1200 produces VERY HOT water. This can cause
serious burns and injury if used incorrectly.
Never point the lance at people or animals as this machine
operates at high temperature and low pressure.
All personnel operating a M1200 machine must be deemed
competent to do so and must be adequately trained. A copy
of the training record is available on demand.
Always check the M1200 for any damage before use.
Damaged cables, hoses or connections must be reported
immediately, and the machine taken out of use until repairs
have been completed.
Use only genuine Weedingtech spare parts and
Foamstream® consumables. This will ensure the best
performance of your machine and maintain the warranty of
the unit.
The M1200 must never be modified, safety interlocks
bypassed or settings adjusted (unless specified in these
guidance notes)
without Weedingtech’s written consent.
Ensure that the M1200 is placed in an area where there is
adequate ventilation when in use.