Weber IGRILL 2, Руководство пользователя

Страница: 13 / 16

13 iGrill 2 | USER GUIDE
Visit weber.com/igrillsupport to learn more about device compatibility, the
languages that are supported by the WEBER iGRILL App, a full user guide
with instructional videos and brilliant barbecuing inspiration. Please read
the full user guide, especially the safety information, before using the
WEBER iGRILL 2 for the first time. Follow the instructions while using the
device.
INTENDED USE:
Use this device to measure and monitor the temperature of barbecued foods. Any
use other than that which is described may cause damage. The manufacturer or
retailer are not liable for damages arising from improper use. When using an
iGRILL 2, never leave your grill unattended and follow all instructions in your
grill owners guide.
Note: The device is not to be used by children or persons with reduced physical,
sensory or mental capabilities.
Note:
The iGRILL 2 and its batteries are not designed to withstand high
temperatures. If the surface is too hot to touch, it’s too hot for the WEBER
iGRILL 2
and its batteries.
Note:
Do not mix old and new batteries. Do not mix alkaline, standard or
rechargeable batteries.
Meat Probe Use
WARNING: Risk of injury! The probes are very sharp. Please be
careful when handling the probes.
WARNING: Risk of burns! Handling the temperature probes
without hand protection will result in severe burns. The coloured
probe indicators are not intended to be touched with bare hands
while using the barbecue as they are not heat-insulated. Please
wear heat-resistant gloves at all times while using this product in
order to avoid being burned.
Important Note: When using the probes, please be sure to route the wire where it
will not be exposed to flames or temperatures exceeding 380°C. Avoid exposing
the probes to temperatures below -30°C. Temperatures below -30°C or above
300°C will not display in the app and will cause the probe to disappear from
the connection.
Clean the probes before first use. The probes are not dishwasher safe. Do not
use chemicals or abrasive detergents to clean the probes. Wipe them down
with a damp towel or cleaning wipe. Take care not to expose the probe’s wiring
or the area where the wiring meets the probe to liquid.
The probes are not waterproof and damage may result from water exposure.
Never submerge the probes in water.
Important Information