Weber mt SRX 750 D Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 24

SRX 750 D 7
Inspection
Tampers must be inspected in accordance with appropriate implementation conditions and operating
conditions, as needed; however, an inspection to ensure operationally safe status must be performed
by an expert at least once a year. The results of the inspection must be recorded in writing and must
be stored at least until the next inspection.
Cleaning work
Prior to cleaning the tamper with a high-pressure cleaner, protect all accessible energized switches,
cable connections, etc. against water penetration by masking them off.
Cleaning tasks should only be executed in areas that are suitable and have been approved for this
purpose (oil separator amongst others).
Disposal
All operating fluids and auxiliary materials must be disposed of in an environmentally-compatible
manner in accordance with country-specific regulations.
Warning against irritants or materials hazardous to health
Warning against a hazardous place
Warning against a suspended load
Wear ear protection
General regulation
Environmental protection
Important information for operating and maintenance personnel is marked by pictograms.
Hard hat
Safety shoes
Protective gloves