webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
6
Software
1.
Configuration Step by Step
The configuration of the MTX-StarEnergy-M is done through a web environment.
The MTX-StarEnergy-M uses its USB port to create a network connection through which it has access to
said web configuration environment.
1.1 Minimum Requirements
•
A PC with Windows 10 and with a web browser (Chrome, IExplorer, Firefox...) and a USB port
•
A USB cable to interconnect the PC with the MTX-StarEnergy-M
1.2 USB driver installation
If you don’t have the drivers installed on your computer this is the first thing to do. The steps to install the
driver are as follows:
•
Unzip file “1_Quectel_LTE_Windows_USB_Driver_V2.1.5.zip” and run the program “setup.exe”
