Suzuki Splash
1314128B_EN
16
Fuel
CAUTION!
Open the vehicle's fuel tank cap, ventilate the tank and then re-close the tank lock.
Catch any fuel running off with an appropriate container.
Install fuel line and metering-pump wiring harness so that they are protected against stone impact. Un-
less specified otherwise, always fasten using cable ties.
Mount the fuel line and wiring harness with rub protection on sharp edges.
WARNING!
The fuel line and wiring harness are routed to the metering pump in as shown in the wiring harness
routing diagram.
Route fuel line
2
in corrugated tube
3
to fire-
wall and route to vehicle underbody together
with wiring harness of metering pump.
1
10 mm dia. clamp
2
Fuel line
3
10 mm dia. corrugated tube
Connect-
ing heater
1
Fuel-tank vent line
Discon-
necting
fuel-tank
vent line
Shorten fuel standpipe
1
to 340 mm length
when stretched out and mould.
Preparing
fuel stand-
pipe
31
1
2
3
32
1
80
33
1
265
220
340
