Webasto Thermo Pro 90, Установка оборудования

Страница: 54 / 55

11 Wiring diagrams
Thermo Pro 90
1113
11.17 Legend for comments 11.18 Legend for plug X8, 12-pin
X9 4-pin plug connection To item P or P1
X10 4-pin plug connection
W-bus, MultiControl / SmartControl connection, Telestart (12 V
only), ThermoCall or diagnosis
X11 2-pin plug connection To item DP
X12 2-pin plug connection To item UP
Y2 Solenoid valve / pump Auxiliary drive / pumping device
Item Description Remarks
No. Remarks
 D+ signal (vehicle motor ON/OFF) for deter-
mining the control temperature

When connecting MultiControl/SmartCon-
trol (W-bus), the black wire must be
removed from plug connection X10 (pin 2)
and isolated (if not already done).
 Fuse for vehicle blower (fuse present in vehi-
cle)

Switch for vehicle blower

EMC interference suppression module (HDD
version only)
 Wiring harness
 Fuse for vehicle blower (fuse present in vehi-
cle)

-

Optional extension available (connection to
plug connection X10)
 CAN module; as per SAW J1939 for diag-
nostics function (optional, HDD version
only)

Mating connector on vehicle conforms to
VG95328R2016P (optional, HDD version
only)

VG95328R2016PN connector (optional,
HDD version only)
No. Remarks
1
Output, battery disconnector afterrunning
signal
2 Output, vehicle fan relay
3 Input switch-on signal (ON/OFF)
4 Operating indicator/error code output
5 Auxiliary drive
6 W-bus
7 Terminal D+
8
CAN GND as per SAE J1939 (HDD version
only)
9 Power supply (terminal 31)
10
CAN LOW as per SAE J1939 (HDD version
only)
11
CAN HIGH as per SAE J1939 (HDD version
only)
12 Power supply (terminal 30)