1. With 1/4" screws or bolts, mount each corner
of the Master Tools Rotary Punch Base (A) to
a sturdy bench.
2. Determine the size of Punch Tube (B) for your
particular application. Loosen Punch Bar Thumb Screw
(M) on end of Punch Bar, then insert the shorter end of
the Punch Tube into the Punch Bar. The collar on the Punch Tube will
rest against the end of the Punch Bar. Holding the Punch Tube, tighten
the Punch Bar Thumb Screw (M) to secure Punch Tube in Punch Bar. (C)
3. To adjust the spacing of holes, hold down top of Spacing Bar (D) so it
remains in vertical position. Loosen Spacing Thumb Screw (E) by turning it
counterclockwise then slide it up or down to align arrow with the desired
spacing measurement. Tighten Spacing Thumb Screw (E) by turning it clockwise.
We recommend checking your spacing on a scrap piece of leather first.
4. Adjust Guide Thumb Screw (F) to accommodate leather width. Insert
leather strap between Leather Guides (G), making sure the Tension
Bar
(H) is on top to hold the leather down. Be sure the strap is snug
between Leather Guides (G); however, setting the Guide Thumb
Screw
(F) too tight can cause irregular spacing of holes, while
setting it too loose can cause the holes on the strap to be off-center.
5. To determine the distance from end of the strap to the first hole,
use the Distance Guide (I) on the back of the machine.
6. Turn Wheel Handle (J) in clockwise rotation to start punching holes.
HANDCRAFTED IN THE USA
LIMITED LIFETIME GUARANTEE
FEATURES
weaverleathersupply.com
800-932-8371
INSERT-143 6/21
ROTARY PUNCH
Congratulations on your Master Tool Rotary Punch purchase. It's the
only hand-operated machine of its kind on the market. This simple and
trouble-free machine punches both leather and coated webbing and
will boost your productivity with its ease of setup and use.
A
• Weaver Exclusive four-sided clicker board anvil
• Dual feed design
• Accommodates straps from 1/2" to 3" wide
• Punches clean holes from 1/2" to 3-1/8" apart
• Adjustable settings for hole spacing and leather thickness
• Includes six hollow punch tubes in sizes 2, 4, 5, 6, 7 and 8
A - Base
B - Punch Tubes
C - Punch Bar
D - Spacing Bar
E - Spacing Thumb Screw
F - Guide Thumb Screw
G - Leather Guides
H - Tension Bar
I - Distance Guide
J - Wheel Handle
K - Anvil
L - Punch Bar Adjustment
M - Punch Bar Thumb Screw
ASSEMBLING THE ROTARY PUNCH
L
A
C
M
D
E
F
G
H
I
J
K
D
E
B
