STEP 3:
RE-INSTALL DRIVE ASSEMBLY
• Place new assembly in body.
• Install new snap ring.
• Reinstall nozzle/cap assembly.
(twist on clockwise).
NOTE: Cap is self-tightening,
no need to overtighten.
STEP 2:
INSTALL NEW NOZZLE
• Twist off nozzle/cap (counterclockwise).
• Pull off nozzle assembly.
• Snap in correct nozzle.
(see Performance Chart).
FOR WINDY CONDITIONS
• Turn short range nozzle to
vertical position to improve
distribution patterns.
D70 SERIES
Full Circle Golf Rotor
NOZZLE INSTALLATION GUIDE
STEP 1:
REMOVE DRIVE ASSEMBLY
Help Desk:
888-484-3776
support.weathermatic.com
99903377_revA
NORMAL WINDY
