myMET Pro Manual V 1.00 — English
Product Description
Your myMET Pro Hand Held Wind Meter measures wind speed, air temperature, humidity, compass, pressure
and calculates wind chill. It then displays that information on the integral LCD, and transmits the information in
real-time to a BLE iOS or Android device within range using the myMET Pro app. All the information can be
tagged with an image and transmitted, using the methods available to the mobile device. NOTE: iPhone 4S or
later, iPad2 or later, and Android 4.2 or later devices are supported.
Getting Started
Your myMET Pro Hand Held Wind Meter package contains a myMET Pro, two Lithium CR2032 batteries
(installed), and a lanyard.
BATTERIES:
The batteries are factory installed.
LANYARD:
To install the lanyard,
feed the small loop through the hole at the bottom corner of the case, and then feed the lanyard through the loop.
myMET Pro USE:
Extend myMET Pro to the fully opened position. If using a tripod, attach it at the bottom of
the case. NOTE: The optional wind vane accessory will align myMET Pro with wind direction when it is tripod
mounted and properly leveled. Hold myMET Pro at the bottom of the case, away from your face and body, to
avoid getting false readings. Your myMET Pro sensors are sensitive.
For good measurements, it is
important that you do not touch, or obstruct, the sensors.
