WDT SOLFOG V3 Скачать руководство пользователя

Страница: 16 / 72

Brine Fogging System Type SOLFOG V3

Index: 02

Change date: 19/09/2023

OI No.: BA DW 042-02 Solfog V3 CB36 EN.docx

Page 16 of 65

Transport and storage

4.1

General safety notices

ATTENTION!

Damage to the device due to improper transport!



The device must only be transported in its original packaging!



When transporting the WDT brine fog maker, proceed with caution to pre-
vent damage due to force or careless loading and unloading.



Avoid exposure to frost during transport!

4.2

Packaging

WARNING!

Danger of suffocation!



Keep packaging and packaging residue, in particular plastic bags, out of reach
of children!

NOTICE

Please pay attention to the notices and pictograms attached to the carton!

4.3

Temporary storage of the device

ATTENTION!

Damage to the device due to improper storage!

The device may be damaged by frost or high temperatures!



Avoid exposure to frost during storage!



Do not store systems and devices next to objects with strong heat emission or
in direct sunlight.



The device must only be stored in its original packaging. Please ensure careful
handling.

4.4

Storage of fragrance oil concentrates / brine

Pay attention to the fragrance oil concentrate manufacturers’ data sheets regarding storage as
well as the local regulations for occupational safety and for environmental and drinking water
protection!

Содержание SOLFOG V3









































































Результаты поиска

Содержание SOLFOG V3

Отзывы:

Похожие инструкции для SOLFOG V3

Бренды по названию

Популярные бренды

WDT SOLFOG V3, Руководство по эксплуатации

Результаты поиска

Содержание SOLFOG V3

Отзывы:

Похожие инструкции для SOLFOG V3

Бренды по названию

Популярные бренды