operation manual SAUNA-VII (07/12)
page 4 of 14
2.2.3
Programme and test switch
The programme and test switch is to choose the operation programmes
and to test all functions of the SAUNA-Plus-VII:
-
operation:
controlled internally with cycle and splash
quantity
-
operation with push-button: start of the splash by external push-
button and adjustment
„splash quantity“ cycle/pause is according to
locking time
-
operation with clock timer: start of the splash according to exactly
adjusted time and according to the adjustment
of the “splash quantity”
-
T-splash:
a splash is started, afterwards the operation
LED blinks, the controller waits for a
readjustment
-
T-pump:
test of the fragrance pump for 20 seconds,
afterwards the operation LED blinks, the
controller waits for a readjustment
-
T-valve:
test of the solenoid valve for 20 seconds,
afterwards the operation LED blinks, the
controller waits for a readjustment
-
T-pressure:
test of the pressure switch (see 5.6)
- T-indication:
test of the pre-indication for 20 seconds,
afterwards the operation LED blinks, the
controller waits for a readjustment
2.2.4
Indications of the controller
The operating state and the function sequence is indicated by three LED´s
at the controller.
green „operation“
shines at standard opearation or if test function
is activated
blinks at a disfunction or after the lapse of a test
programme
yellow „splash indication“ shines according to the adjusted pre-
indication time of the splash (see 2.2.6)
yellow „splash“
shines during the splash
