operation manual SAUNA-VII (07/12)
page 3 of 14
2.
Technical Data
The unit consists of:
-
water connection ½“ female thread (app. 150l per hour)
-
solenoid valve ½“
-
peristaltic pump 12-24VDC for fragrance
- controller with connector for ore-indiation of the splash 230VAC
-
connector for push-button or external start device
-
voltage supply 230VAC 1,25A
-
splash sprinkler 3/8“ female thread
-
measures 44x41x17 cm
-
fragrance:
up to 15 ml pro Aufguss
-
water consumption: up tp 800 ml per splash at adjustment 100%
-
cycle time:
10-60 Minuten
options
-
tube cutter (if the splash tubing does not fall)
-
enlargement for the splash sprinkler
-
connections for PTFE hose 6x1
-
push-button for external control
-
clock-timer
2.2
The controller
2.2.1 Cycle - pause in minutes
The cycle time (time from splash to
splash) is adjustable from 10 to 60
minutes. After the lapse of the cycle
time the times for the dosing of water
and fragrance run accordingly. The
operation time of the fragrance dosing
is limited to the opening time of the
solenoid valve by the pressure switch.
If the unit is operated externally (e.g.
by push-button) the pause time is
according to a locking time in which
no further splash can be started.
2.2.2
Splash quantity
The dosing times are adjustable by
the rotary knobs from 0 to 20
seconds. During this time the max.
quantity that is dosed is 0.8l water
with 15ml of fragrance.
Attention: fragrance can only be dosed into flowing water!!!
