ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
· Ensure a barrel blocking device is fitted to
the ANGEL.
· Ensure the hopper is removed from the
ANGEL.
· Ensure that there are no paintballs in the
ANGEL.
· SHOULD YOU BE UNSURE AT ANY STAGE YOU
MUST SEEK EXPERT ADVICE.
Once you have accessed the Status menu the
Angel automatically reverts to SAFE
Status
The
Status
menu allows you to select between
Live/Safe,
the
Information
display screen and
the
Parameters
setting.
•
To access the
Status
menu press and hold the
navigation switch up or down for 1.5 seconds.
•
Once in the
Status
menu using the navigation
switch scroll up or down to choose between
Live/Safe,
Information
and
Parameters
.
•
Pressing the navigation switch inwards will select
the highlighted function.
Information
The
Information
screen will display all the relevant
information relating to the electronic settings of your
Angel.
•
With the Angel on and Live push the navigation
switch up or down for 1.5 seconds.
•
The Angel will be in the
Status
menu.
•
Use the navigation switch to scroll through
the
Status
menu settings till
Information
is highlighted.
•
Push the navigation switch inwards to select the
Information
menu.
•
The following information will be displayed on the
OLED. Scroll up or down using the navigation switch
to view this information.
Parameters
The Angel’s settings can be easily adjusted from the
Parameters
menu.
•
With the Angel on and Live push and hold the
navigation switch up or down for 1.5 seconds.
•
The Angel will be in the Status menu.
•
Use the navigation switch to scroll through the
Status menu settings till
Parameters
is highlighted.
•
Push the navigation switch inwards to select the
Parameters
menu.
The following functions are all accessed via the
navigation switch and can all be accessed and
adjusted from the Parameters display.
OLED menu
Status
Software version
Mode
Soft break-out setting
Hard break-out setting
Soft ramp setting
Hard ramp setting
Dwell time
MROF eyes on limit
MROF eyes off limit
De bounce level
Loader speed level
Shot % filtering
Anti Bolt Stick
Angel eyes on/off
Game timer set
Alarm time set
Total shots fired since reset
Battery voltage
Modes
Valve Dwell
De-bounce
Loader speed
MROF eyes ON
MROF eyes OFF
Breakout
Ramp feature
Shot Filter
ABS
Game Time Set
Alarm Time Set
The navigation switch is
located on the rear of the
grip frame and allows
access to the Angel 1
internal menu option.
Push the switch up or down
and hold for 1.5 seconds.
To navigate through the
options simply push the
switch up to scroll up and
push the switch down to
scroll down. Press the
switch inwards to make
a selection.
IMPORTANT NOTE
At any point when accessing the OLED
menu options - pulling the trigger will
return you to the SAFE screen.
