Rubber finger detent
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
· Ensure a barrel blocking device is fitted to
the ANGEL.
· Ensure the hopper is removed from the
ANGEL.
· Ensure that there are no paintballs in the
ANGEL.
· SHOULD YOU BE UNSURE AT ANY STAGE YOU
MUST SEEK EXPERT ADVICE.
To gain access to the rubber finger detents
, to carry
out maintenance or to replace the rubber fingers.
•
Remove Macroline from Fore Grip
.
•
Remove Fore Grip Cap
.
•
Remove Mini Reg
.
•
Remove Fore Grip
– ensure that Fore Grip Seal
isn’t lost (see page 20).
•
Remove the volume chamber maintenance plug
with a 4mm Allen key.
•
To remove the eye cover
, slide a blunt blade
beneath the ‘A icon’ on the left side of the eye cover
(ensuring you do not insert the blade too far) to
lever out and retain the arm open. Repeat the same
procedure on the right arm. Slide the cover towards
the front and off the Angel ensuring the Rubber
Finger Detents
are not lost.
Rubber detent
orientation
