background image

ADHERE STRICTLY TO THESE

AND ALL OTHER SAFETY

INSTRUCTIONS AND GUIDELINES

·  Ensure a barrel blocking device is fitted to 

the ANGEL.  

·  Ensure the hopper is removed from the 

ANGEL.

·  Ensure that there are no paintballs in the 

ANGEL.

·  SHOULD YOU BE UNSURE AT ANY STAGE YOU 

MUST SEEK EXPERT ADVICE.

Game timer alarm 

 

      Tournament lock

Game timer/alarm

This is a fully interactive game timer with count 

down alarm that will allow you and your team to 

play in unison. The timer and alarm can be set in 

either 1 second or 1 minute increments from 0 to 60 

minutes. Once the alarm and timer are set they will 

be activated by the first trigger pull after making the 

Angel live and selecting the timer function.

• 

Ensure that the Angel is switched on.

• 

Ensure that you are not activating the trigger.

•  

Push and hold the navigation switch UP or DOWN 

for 1.5 seconds.

•  

The 

Status

 menu will be displayed.

•  

Push the navigation button up to highlight the 

Parameters

 menu.

•  

Push the navigation switch in to select the  

 Parameters 

 men. 

•  

From the 

Parameters

 menu select the 

 Game or 

i

alarm timer 

 feature depending on what you wish 

to adjust by pushing the navigation switch inwards.

•  

Using the navigation switch scroll up or down to 

highlight 

 Change timer 

.

•  

Push the navigation button to select 

 

 Change timer 

.

•  

Using the navigation switch scroll up or down to 

select the first digit required.

•  

Push the navigation button inward to store the first 

digit.

•  

Using the navigation switch scroll up or down to 

select the second digit required.

•  

Push the navigation button inward to store the 

second digit.

•  

Using the navigation switch scroll up or down to 

select the third digit required.

•  

Push the navigation button inward to store the 

third digit.

•  

Using the navigation switch scroll up or down to 

select the fourth digit required.

•  

Push the navigation button inward to store the 

fourth digit.

• 

Push the navigation switch inward to 

Save time

Saved game timer/game alarm

 message 

displayed on screen. 

Tournament lock

To comply with some Tournament rules some of the 
Angels features are required to be locked down so 
that they can not be adjusted on the field of play.  

•  

Press the internal button located on the circuit 
board inside the grip frame 

.

 

•  

The screen will display the internal options menu. 

•  

Using the navigation switch scroll up or down to 
highlight the 

 Tournament lock 

 function. 

•  

Press the navigation switch inward to initiate the 

Tournament lock features.

 

•  

Using the navigation switch scroll up or down  
to highlight the 

 Lock 

 or 

 Unlock 

 feature  

as required.  

•  

Press the navigation switch inward to enable or 
disable the 

Tournament lock

 function as required.

•  

You will be asked to confirm that you wish to 
continue with this action. Press the navigation 
button inward to confirm this is correct.

•  

A padlock icon will be displayed on the screen 
indicating the Status of the tournament lock.

•  

The following features are affected by the 
tournament lock.

Modes
MROF eyes on
MROF eyes off
Dwell
De-Bounce
Shot % filtering
Anti Bolt Stick

In order to adjust any of these features the 
tournament lock must be disabled.

Содержание ANGEL





































Отзывы: