wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Tote Trays
Assembly Instructions
Important Information
•
These Assembly Instructions are based on the assembly
of the ELO® Plymouth Desk. These instructions, however,
comply with all Tote Trays.
•
Legs are required to be assembled to desk top before
installing tote trays.
•
Discard any extra hardware that may be included.
Tools Required
•
Screw gun
•
4mm hex bit
•
Phillips head
screwdriver
•
Drill bit extension
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
V030922 Version subject to change
Step 1:
•
Connect the plastic runner ① to mounting bracket ② by inserting the pegs of the runner into the mounting
bracket. Place flat head cap screw ③ through runner and fasten with hex nut ④ on the backside. Turn hex nut ④
clockwise to tighten. Do this for both the left and right rails.
Step 2:
•
Assemble tote tray ⑤ with the runners ① on each side. The front of the tote tray needs to align with the angled
end of the runner as shown in image below.
③
④
①
②
④
⑤
①