background image

wibenchmfg.com

507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303

Specifications are subject to change. Product 

images are for illustrative purposes only and may 

differ from the actual product.

1

Step 1:  

• 

Place the top face down on a protected flat surface.

Step 2:  

• 

Place LOBO frame tabs down on top of the top and align 

the frame tabs with pre-drilled pilot holes in the top.

Step 3:

• 

Using a # S2 square bit, secure frame to top with #10 x 

3/4” square pan screws using one screw per tab. 

Step 4:

• 

Starting at one corner, place the 5/16” bolt that is welded 

to leg through corner support brace of frame.  

Step 5:

• 

Place the 5/16” lock washer and 5/16” hex nut onto the leg 

bolt and tighten with 1/2” wrench. Repeat 

Steps 4 & 5

 

on 

remaining legs.

Step 6:

• 

Use a 5/16” hex bit to secure the leg plate to the top with 

#10 16x3/4” hex washer head self-drilling screws. Table 

will not have pre-drilled holes for the leg plates.

Step 7:

• 

Adjust the leg to desired height.

Step 8:

• 

With someone’s help, turn table upright.

 Steps 4 & 5

 Step 3

 Step 6

Assembly Instructions

LOBO Table

Stainless Steel Top

Before you begin, please make sure all parts and proper 

quantities are included. (See Part Identifier Key) Any parts 

damaged during shipment must be reported within 24 hours of 

receipt. To report information regarding damages or if you have 

any questions, please call 800.242.2303.

Tools Required

• 

1/2” wrench

• 

Screw gun

• 

#S2 square bit

V122821 Version subject to change

Содержание LOBO






Отзывы: