1
wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Step 1:
Place desktop face down on protected surface so pilot holes and inserts
are facing up.
Step 2:
With drawers taken out(if unit has them), place the 1st base cabinet
upside down on the desktop, aligning with inserts.
Step 3:
Use (4) 1/4”-20x35mm joint connector bolts and a 5/32” hex bit with a
screw gun to fasten the base cabinet to desktop. Repeat
Steps 2 & 3
to
attached the base cabinet for the other side.
Step 4:
Use (16) 1/4”-20x25mm Joint Connector Bolts and a 5/32” hex bit with a
screw gun to fasten (2) 75mm casters and (2) 75mm Locking casters to
the bottom of one of the base cabinets. Repeat
Step 4
to attach 75mm
casters to the other base cabinet.
Step 5:
Align the doweled apron with the predrilled guide holes in the middle
of the table. Attach L-Brackets with Pan Head Philips screws to secure
modesty panel in place. Using (1) L-Bracket, attach one of the ends of
the modesty panel to the facing front side of the cabinet. Repeat this
for the other end. Use (2) L-Brackets to attach long side of panel to
desktop. (See image to right for approximate locations)
Step 6:
With someone’s help, lift desk up and place on casters.
Step 7:
Flip wire pulls/pulls to front.
V061919 subject to change.
Jackson Desk
w/ 2 Pedestal Bases
TD2020-AC
Keys will be taped
inside the cabinet
(4) L-Brackets facing front
side of cabinet
(1) Modesty panel
w/ dowels
Step
5
(2) 75mm non-locking casters
(2) 75mm locking casters
Step
4
(2) 75mm non-locking casters
(2) 75mm locking casters
Step
4
(1) Base Cabinet
Steps
2-3
Steps
2-3
Step
7
Completed Jackson Desk
Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key page) Any parts damaged during shipment must
be reported within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
