1
wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
ELO® Ingenuity Table
Assembly Instructions
Step 1:
• Place top face down on protected flat surface so threaded
inserts are facing up.
Step 2:
• Align leg with threaded inserts.
• Using a 4mm Allen wrench or 4mm hex bit and a screw gun,
fasten leg to top with the 1/4-20 x 15mm joint connector bolts.
• Repeat this for the rest of the legs.
Step 3:
• Adjust legs to desired height and then with someone’s help,
turn table upright.
Step 4:
• Align pre-drilled holes in one of the long laminate rails with
the threaded inserts in the side of the top.
• Using a 1/4-20x40mm joint connector bolt, insert the bolt
through the pre-drilled hole in the rail into the threaded
insert of the top. Use a 4mm Allen wrench or a 4mm hex bit
and a screw gun to fasten bolt into place.
• After the first bolt is fastened, proceed attaching the
remaining bolts in the long rail.
• Repeat
Step 4
for the remaining three rails.
V030121 subject to change.
Steps
1-2
Step
4
ELP3069-ADJ-RR6
Step
2
Part Identifier Key
Part #
Description
Qty.
04009023
1/4”-20 x 15mm joint connector bolts
6 per leg
0406526
1/4”-20 x 40mm joint connector bolts
(Used to attach rails to top)
16
Tools Required
• Screw gun
• 4mm hex bit
• 4mm Allen wrench
