1
wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
V042721 subject to change.
Elevate Café Table/Lectern
04067306: Column
04067411: 26” Base
04067305: 32” Base
Assembly Instructions
CAUTION: DON’T touch
the pin that is circled in red
while assembling
D
E
F
G
G
I
N
D
E
F
Step 1:
• Take Center Post (
D, E, F
) and attachment plate
(
G
) out of box.
• Place Attachment Plate (
G
) with countersinks
facing up on the top of the Center Post (
D, E, F
).
• Attach Plate (
G
) to the center post using 6
Hexhead Machine Screws (
I
).
• Tighten the Hexhead Machine Screws (
I
) using
the 5mm Allen Wrench (
N
).
D
G
O
E
F
G
Step 2:
• Place top face down on protected surface so
threaded inserts are facing up. Align Center
Post (
D, E, F
)/Attachment Plate (
G
) with threaded
inserts and attach using 6 Joint Connector Bolts
(
H
).
• Tighten the Joint Connector Bolts (
H
) using the
4mm Allen Wrench (
O
).
Step 3:
• Remove the black plastic cap from Center Post
(
D, E, F
). Cap can be discarded.
•
CAUTION:
DO NOT
touch the middle pin
during assembly. This may cause the pneumatic
cylinder to come out. The pin is circled in red.
(See picture to the right)
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
