wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
1
Elevate Student Desk
Assembly Instructions
04068471: -EJA
04068604: -ADJ
V021022 Version subject to change
Tools Required
•
Screw gun
•
4mm hex bit
•
Phillips head
screwdriver
•
Drill bit extension
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
Step 1:
• Take base out of box and place on a protected flat surface.
• Insert center post into the base.
Base
Center Post
NOTE:
These Assembly Instructions are based on the
assembly of the Elevate Adapt XL (U.S. Patent D780487)
Student Desk with an adjustable height base. Type and
quantity of parts may vary depending on which desk or table
is ordered. These instructions comply with all
Elevate Student Desks.
