Waygate Technologies Krautkramer USM Go, Руководство по эксплуатации

Страница: 67 / 296

Important default settings 4 Principles of operation
USM Go Rev. 10 (06/2021) 4-15
Date format, Date, and Time
The date is saved together with the inspection results.
You can set the date format, the date, and the time us-
ing the corresponding functions of the function group
CONFIG1 on the second operating level.
ATTENTION
In view of a correct documentation, always
make sure that you are using the correct date
and the correct time. Remember to turn the
clock during the change from winter time to
summer time.
– Switch over to the second operating level.
– In the function group CONFIG1 , select the function
DATE FORMAT .
– Press the function keys to change the date format.
The time format is changed together with the date for-
mat.
– Select the function DATE .
– Press the joystick (USM Go) or the center key of the
keypad (USM Go+) to change the setting. The first
value (day, month, or year) is highlighted.
– Use the navigation to change the highlighted value
and switch over to the next value.
– Change the other values in the same way.
– Finally, press the joystick (USM Go) or the center key
of the keypad (USM Go+) to close the setting. The
new values apply immediately.
– Select the function TIME .
– Change the time in the same way as you did previ-
ously for the date.
– Finally, press the joystick (USM Go) or the center key
of the keypad (USM Go+) to close the setting. The
new values apply immediately.