Waygate Technologies Krautkramer USM Go, Руководство по эксплуатации

Страница: 52 / 296

3 Initial start-up Starting the USM Go
3-12 Rev. 10 (06/2021) USM Go
Powering Off
To power the USM Go off, shortly press the Power
key (1) on the side of the instrument casing.
The settings of all function values and the default set-
tings (language and units) are retained after powering
off.
Factory default setting (Reset)
If you can no longer use the functions of your instrument
or if the instrument no longer reacts as expected, you
can reset it to the factory default settings. Any data
saved to the SD card will be retained, all other individual
settings, e.g. language and units, will be reset to the fac-
tory default settings.
– Power the instrument off.
– Press the further end of the Gain key (1), the further
end of the Function key (2), and the Power key (3) si-
multaneously, and hold all three keys pressed until
the start display or the page of the instrument selec-
tion appears.
The instrument starts with the factory default settings
(for language selection, see Section
Language setting ,
page 4-13).
1
3 2