Waygate Technologies Krautkramer USM 100, Руководство по эксплуатации, Страница: 151 / 330

Gates 5 Operation
Krautkrämer USM 100 Rev. 9 (09/2023) 151
Gate B Start Mode
The start of the gate B is normally positioned starting
from the initial pulse as in the case of gate A.
You can alternatively specify the start of the gate B in re-
lation to an event in gate A. This function is also referred
to as automatic gate tracking. If there is no event in the
gate A, the starting point of the gate B is identical with
the value of the function
Gate A Start (see page 146).
The width and the threshold of the gate B are not affect-
ed by the gate tracking.
The tracking of the optional gate C is identical with that
of the gate B. However, the gate C can additionally still
be coupled to events in the gate B.
IP
The gate B is positioned starting from the initial pulse.
IF
The gate B is positioned starting from the interface
echo. The
IF option can only be set when the interface
echo gate ( IF ) is selected in the function C/IF Gate
Mode (see page 152).
Gate A
If you choose the setting Gate A , the gate B is always
shifted automatically when you shift the starting point of
the gate A.